FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

2
2-26
McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
Installation Tasks
Figure 2-15 Configure Panel (Security Page with User Rights Tab)
2. Under the Currer User Records, enter the new password.
3. Click Activate to save the information. The message Your changes
to the user rights configuration have been successfully
activated appears.
NOTE: If you want to create a user account, review the SANpilot User’s
Guide for more information. Before you create a new user, you should review
information on the security features provided with SANtegrity and RADIUS
Servers such as authentication for the various interfaces such as Web (HTTP),
CLI, Serial Port, E Port, N Port, and OSMS.
Configure Port
Binding
Perform this procedure to configure Fibre Channel port binding by
WWN. To configure port binding:
1. At the Configure panel, click the Port Binding tab. The Security
page displays with the Port Binding tab selected (Figure 2-16).