FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

2
Installation Tasks
2-13
Installation Tasks
Configure Date and
Time
Perform this procedure to configure the effective date and time for
the switch. To set the date and time:
1. At the Configure panel, click the Date/Time tab. The Switch page
displays with the Date/Time tab selected (Figure 2-7).
Figure 2-7 Configure Panel (Switch Page with Date/Time Tab)
a. Click the Date fields that require change, and type numbers in
the following ranges:
•Month (MM): 1 through 12.
•Day (DD): 1 through 31.
•Year (YYYY): greater than 1980.
b. Click the Time fields that require change, and type numbers in
the following ranges:
•Hour (HH): 0 through 23.
•Minute (MM): 0 through 59.
•Second (SS): 0 through 59.
2. Click Activate to save and activate the changes. The message Your
changes to the date/time configuration have been successfully
activated appears.