FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

2
2-12
McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
Installation Tasks
Figure 2-6 Configure Panel (Switch Page with Identification Tab)
a. Type a switch name of 24 alphanumeric characters or less in
the Name field. Each switch should be configured with a
unique name.
If the switch is installed on a public LAN, the name should
reflect the switch’s Ethernet network domain name system
(DNS) host name. For example, if the DNS host name is
sphereon4300.mcdata.com, the name entered in this dialog
box should be sphereon4300.
b. Type a switch description of 255 alphanumeric characters or
less in the Description field.
c. Type the switch’s physical location (255 alphanumeric
characters or less) in the Location field.
d. Type the name of a contact person (255 alphanumeric
characters or less) in the Contact field.
2. Click Activate to save and activate the changes. The message Your
changes to the identification configuration have been
successfully activated appears.