FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

2
2-8
McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
Installation Tasks
c. Type the default user name and password.
NOTE: The default SANpilot interface user name is Administrator
and the default password is password. The user name and password
are case-sensitive.
d. Click OK. The SANpilot interface opens with the View panel
open and the Switch page displayed (Figure 2-3).
Figure 2-3 View Panel (Switch Page)
Configure Switch
Ports
Perform procedures in this section to configure names and operating
characteristics for Fibre Channel ports. To configure one or more
switch ports:
1. At the View panel, select the Configure option at the left side of the
panel. The Configure panel opens with the Ports page displayed
with Basic Info selected.(Figure 2-4 on page 2-9).