FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

McDATA Sphereon 4300 Fabric Switch Installation and Service Manual

Contents

Task 2: Unpack, Inspect, and Install the Switch ...........................2-3

Unpack and Inspect the Switch...............................................2-4

Desktop Installation ..................................................................2-4

Rack-Mount Installation...........................................................2-5

Task 3: Configure the Switch at the SANpilot Interface..............2-6

Configure Switch Ports.............................................................2-8

Configure BB Credit................................................................2-10

Configure Switch Identification ............................................2-11

Configure Date and Time.......................................................2-13

Configure Operating Parameters..........................................2-14

Configure Fabric Parameters .................................................2-16

Configure Network Information...........................................2-19

Configure SNMP .....................................................................2-21

Enable or Disable the CLI and SSH ......................................2-23

Enable or Disable OSMS and Host Control.........................2-24

Change User Password...........................................................2-25

Configure Port Binding ..........................................................2-26

Configure Switch Binding......................................................2-27

Configuring the Switch Binding Membership List ............2-31

Configure Fabric Binding.......................................................2-32

Enable or Disable Enterprise Fabric Mode ..........................2-34

Configure OpenTrunking.......................................................2-35

Install PFE Keys (Optional)....................................................2-38

Task 4: Configure Switch Network Information (Optional).....2-39

Task 5: Cable Fibre Channel Ports................................................2-45

Task 6: Configure Zoning (Optional)...........................................2-46

Configure Zones ......................................................................2-46

Configure Zone Sets................................................................2-49

Task 7: Connect Switch to a Fabric Element (Optional)............2-51

Task 8: Register with the McDATA File Center..........................2-52

Chapter 3 Diagnostics

Maintenance Analysis Procedures .................................................3-1

Factory Defaults.........................................................................3-1

Quick Start..................................................................................3-2

MAP 0000: Start MAP ......................................................................3-6

MAP 0100: Power Distribution Analysis ....................................3-18

MAP 0200: POST Failure Analysis...............................................3-21

MAP 0300: Loss of Web Browser PC Communication..............3-23

MAP 0400: FRU Failure Analysis .................................................3-30

MAP 0500: Port Failure and Link Incident Analysis.................3-35

MAP 0600: Fabric, ISL, and Segmented Port Problem