FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

Installation Tasks
2-1
2
Installation Tasks
This chapter describes tasks to install, configure, and verify operation
of the Sphereon 4300 Switch and SANpilot interface. The switch can
be installed on a table top, mounted in a McDATA FC-512 Fabricenter
equipment cabinet, or mounted in any standard 19-inch equipment
rack.
Factory Defaults
Table 2-1 lists factory-set defaults for the Sphereon 4300 Switch.
Table 2-1 Factory-Set Defaults (Sphereon 4300 Switch)
Item Default
SANpilot interface user name (case sensitive) Administrator
SANpilot interface password (case sensitive) password
Customer-level password (maintenance port access) password
Maintenance-level password (maintenance port access) level-2
IP address 10.1.1.10
Subnet mask 255.0.0.0
Gateway address 0.0.0.0