FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

I-3
Index
Index
add version to browser PC 4-33
determine version 4-32
download 4-38
FL_Port
configuring 2-8
description 1-2
FRU removal
SFP transceiver 5-2
tools required 5-2
FRU replacement
SFP transceiver 5-4
tools required 5-2
FRUs
description 1-3
illustrated parts breakdown 6-1
SFP transceiver 1-4
status LEDs 1-6
full-volatility feature 4-23
G
gateway address
change switch address 2-19, 2-40
switch default 2-1, 3-1
H
heat dissipation 1-7
I
illustrated parts breakdown
front-accessible FRUs 6-2
miscellaneous parts 6-3
power cord 6-4
IML switch 4-31
IML/Reset button
function 1-5
location 1-3
insistent domain ID 2-15
installation options
customer-supplied rack 2-2
desktop 2-2
Fabricenter cabinet 2-2
installation tasks
summary 2-2
Task 1 - Verify installation requirements 2-3
Task 2 - Unpack, inspect, and install the
switch 2-3
Task 3 - Configure the switch at the SANpilot
interface 2-6
Task 4 - Configure switch network
information 2-39
Task 5 - Cable Fibre Channel ports 2-45
Task 6 - Configure zoning (optional) 2-46
Task 7 - Connect switch to a fabric element
(optional) 2-51
Task 8 - Register with the McDATA file
center 2-52
internal loopback test
description 4-19
procedure 4-19
interop mode 2-18
interswitch link
description 1-2
fault isolation 3-54
IP address
change switch address 2-19, 2-39
switch default 2-1, 3-1
L
laser transceiver
compliance statement xvi
description 1-4
illustrated parts breakdown 6-2
removal 5-2
replacement 5-4
types available 1-4
LEDs
ERR 1-6
port status 1-6, 4-11
PWR 1-6
Link Incident Log
description 4-5
illustration 4-5
list
switch binding membership 2-28
log
clearing 4-6, 4-7, 4-8, 4-10, 4-11
events 4-6, 4-7, 4-8, 4-9, 4-10
Log tab view 4-6, 4-7, 4-8, 4-9, 4-10
logs
clear 4-2