FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
I-2
Index
default
maintenance port password 2-43
SANpilot interface password 2-8
SANpilot interface user name 2-8
switch gateway address 2-1, 3-1
switch IP address 2-1, 3-1
switch passwords 2-1, 3-1
switch subnet mask 2-1, 3-1
dimensions 1-7
disable
EFM 2-34
OSMS 2-24
download firmware 4-38
E
E_D_TOV 2-17
E_Port
configuring 2-8
description 1-2
PFE key requirement 1-2
segmented 3-54
enable
EFM 2-34
OSMS 2-24
enterprise fabric mode
disable 2-34
enable 2-34
environment
operating 1-8
shipping 1-8
storage 1-8
ERR LED
description 1-6
location 1-3
error
log, clearing 4-6, 4-7, 4-8, 4-10, 4-11
error detection
description 1-10
event codes 3-3
SANpilot interface 1-11
error reporting
description 1-10
event codes 3-3
SANpilot interface 1-11
ESD precautions xx
Ethernet connector
description 1-6
location 1-3
event codes
cooling fan events (300 - 399) A-20
CTP card events (400 - 499) A-23
description A-2
port events (500 - 599) A-29
system events (000 - 199) A-2
thermal sensor events (800 - 899) A-37
Event Log
description 4-4
illustration 4-3
event log 4-6, 4-7, 4-8, 4-9, 4-10
clearing 4-6, 4-7, 4-8, 4-10, 4-11
external loopback test
description 4-19
procedure 4-21
F
F_Port
configuring 2-8
description 1-2
fabric binding
configure 2-32
description 2-32
fabric parameters, configure 2-16
Fabricenter equipment cabinet
description 1-2
switch installation 2-5
fault isolation
MAP 0000 - Start MAP 3-6
MAP 0100 - Power distribution analysis 3-18
MAP 0200 - POST failure analysis 3-21
MAP 0300 - Loss of web browser PC
communication 3-23
MAP 0400 - FRU failure analysis 3-30
MAP 0500 - Port failure and link incident
analysis 3-35
MAP 0600 - Fabric, ISL, and segmented port
problem determination 3-54
summary 3-2
FCC compliance statement xvi
fiber-optic protective plug
description 1-14
illustration 1-14
firmware