FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

A-30

McDATA Sphereon 4300 Fabric Switch Installation and Service Manual

Event Code: 508

Message: Fibre Channel port anomaly detected.

Severity: Informational.

Explanation: The switch detected a deviation in the normal operating mode or status of the indicated Fibre Channel port.

Action: No action required. An event code 506 is generated if this anomaly results in a hard port failure.

Event Data: Byte 0 = port number (00 - 11). Byte 12 = detecting port.

Byte 1 = anomaly reason code. Byte 13 = connected port.

Bytes 4 - 7 = elapsed millisecond tick count. Bytes 16 and 17 = high-availability error callout #3.

Bytes 8 and 9 = high-availability error callout #1. Bytes 18 and 19 = high-availability error callout #4.

Bytes 10 and 11 = high-availability error callout #2.

Distribution: Switch Management Server Host

SANpilot

Event Log

System

Error LED

Event Log E-Mail Call-Home Sense Info Link Incident

✔

Event Code: 510

Message: SFP optical transceiver hot-insertion initiated.

Severity: Informational.

Explanation: Installation of an SFP optical transceiver was initiated with the switch powered on and operational. The event

indicates operational firmware detected the presence of the transceiver.

Action: No action required.

Event Data: Byte 0 = port number (00 - 11)