FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

A-28

McDATA Sphereon 4300 Fabric Switch Installation and Service Manual

Event Code: 445

Message: ASIC detected a system anomaly.

Severity: Informational.

Explanation: The application-specific integrated chip (ASIC) detected a deviation in the normal operating mode or operating

status of the switch.

Action: No action required. An additional event code is generated if this incident exceeds an error threshold that results in

a system event.

Event Data: Byte 0 = embedded port number. Byte 12 = detecting port.

Byte 1 = anomaly reason code. Byte 13 = connected port.

Bytes 4 - 7 = elapsed millisecond tick count. Bytes 16 and 17 = high-availability error callout #3.

Bytes 8 and 9 = high-availability error callout #1. Bytes 18 and 19 = high-availability error callout #4.

Bytes 10 and 11 = high-availability error callout #2.

Distribution: Switch Management Server Host

SANpilot

Event Log

System

Error LED

Event Log E-Mail Call-Home Sense Info Link Incident

✔

Event Code: 453

Message: New feature key installed.

Severity: Informational.

Explanation: This event occurs when a new feature key is installed from the SANpilot interface. The switch performs an IPL

when the feature key is enabled. Event data indicates which feature or features are installed.

Action: No action required.

Event Data: Byte 0 = feature description as follows: 00 - 04 = Flexport Technology, 06 = Open-system management server.