FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

A-14

McDATA Sphereon 4300 Fabric Switch Installation and Service Manual

Event Code: 120

Message: Error detected while processing system management command.

Severity: Informational.

Explanation: This event occurs when the switch receives an management command that violates specified boundary

conditions, typically as a result of a network error. The switch rejects the command, drops the switch-to-server

Ethernet link, and forces error recovery processing. When the link recovers, the command can be retried.

Action: No action is required for an isolated event. If this event persists, perform a data collection for this switch and

return the diskette to McDATA support personnel.

Event Data: No supplementary data included with the event.

Distribution: Switch Management Server Host

SANpilot

Event Log

System

Error LED

Event Log E-Mail Call-Home Sense Info Link Incident

✔

Event Code: 121

Message: Zone set activation failed - zone set too large.

Severity: Informational.

Explanation: This event occurs when the switch receives a zone set activation command that exceeds the size supported by

the switch. The switch rejects the command, drops the switch-to-server Ethernet link, and forces error recovery

processing. When the link recovers, the command can be modified and retried.

Action: Reduce the size of the zone set to conform to the limit specified, then retry the activation command.