FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

A-6
McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
Event Code: 061
Message: Fabric Controller database invalid.
Severity: Minor.
Explanation: Following an IML or firmware download, the fabric controller database failed its CRC validation. All fabric
controller databases initialize to an empty state, resulting in a momentary loss of interswitch communication.
Action: Perform the data collection procedure and return the diskette to McDATA support personnel.
Event Data: No supplementary data included with the event.
Distribution: Switch Management Server Host
SANpilot
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
✔✔
Event Code: 062
Message: Maximum interswitch hop count exceeded.
Severity: Informational.
Explanation: The fabric controller software detected that a path to another fabric element (director or switch) traverses more
than seven interswitch links (ISLs or hops). This may result in Fibre Channel frames persisting in the fabric longer
than standard timeout values allow.
Action: If possible, reconfigure the fabric so the path between any two directors or switches traverses no more than
seven ISLs.
Event Data: Byte 0 = domain ID of the fabric element (director or switch) more than seven hops away.
Distribution: Switch Management Server Host
SANpilot
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
✔