FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

Repair Information
4-41
1. Notify the customer the switch is to be set offline. Ensure the
customer’s system administrator quiesces Fibre Channel frame
traffic through the switch and sets attached FC-AL devices
offline.
2. Set the switch offline. For instructions, refer to Set the Switch
Online or Offline on page 4-25.
3. When the SANpilot interface opens, the View panel and Switch
page appear as the default. At the View panel, select the Operations
option at the left side of the panel. The Operations panel opens
with the Switch page displayed.
4. Click the Reset Config tab. The Switch page displays with the Reset
Config tab selected (Figure 4-35).
Figure 4-35 Operations Panel (Switch Page with Reset Config Tab)
5. Click Reset Configuration. A browser-specific message box
displays (Figure 4-36 on page 4-42).