FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

4-38
McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
12. Click Close to close the dialog box. The new firmware version is
downloaded and saved to the browser PC hard drive.
13. At the browser PC, close the Internet session.
Download a
Firmware Version to
the Switch
To download a firmware version (to the switch) from the hard drive
of the browser PC accessing the SANpilot interface:
NOTE: When downloading a firmware version, follow all procedural
information contained in release notes or EC instructions that accompany the
firmware version. This information supplements information provided in
this general procedure.
1. When the SANpilot interface opens, the View panel and Switch
page appear as the default. At the View panel, select the Operations
option at the left side of the panel. The Operations panel opens
with the Switch page displayed.
2. Click the Maintenance and Firmware Upgrade tabs. The Maintenance
page displays with the Firmware Upgrade tab selected
(Figure 4-31).
Figure 4-31 Operations Panel (Maintenance Page with Firmware Upgrade Tab)