FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

Repair Information
4-15
— Fabric mixed port (FX_Port). This setting also configures a
port as a fabric loop port (FL_Port).
— Generic port (G_Port). This selection is available only if
enabled through an optional PFE key.
— Fabric port (F_Port).
— Expansion port (E_Port). This selection is available only if
enabled through an optional PFE key.
Port Stats Page When the SANpilot interface opens, the View panel appears as the
default panel. At the View panel, select the Monitor option at the left
side of the panel. The Monitor panel opens with the Port List page
displayed. Click the Port Stats tab. The Monitor panel displays with
the Port Stats page selected (Figure 4-12).
Figure 4-12 Monitor Panel (Port Stats Page)