FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

Repair Information
4-13
SANpilot Interface
To obtain port operational information at the SANpilot interface,
inspect parameters at the:
• Monitor Panel - Port List page.
• Monitor Panel - Port Stats page.
• View panel - Port Properties page.
Port List Page When the SANpilot interface opens, the View panel appears as the
default panel. At the View panel, select the Monitor option at the left
side of the panel. The Monitor panel opens with the Port List page
displayed (Figure 4-11 on page 4-14).
Segmented
E_Port
On Off Yellow Triangle The E_Port is segmented, preventing two connected switches
from joining and forming a multiswitch fabric.The reason
appears in the Reason field of the Port Properties dialog box.
Testing Off
On
Blinking
Blinking
Yellow Triangle
Yellow Triangle
The port is performing an internal loopback test.
The port is performing an external loopback test.
Table 4-1 Port Operational States (Continued)
Port
State
Blue/Green
LED
Amber
LED
Alert
Symbol
Description