FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

Repair Information
4-11
Figure 4-10 All Logs View
The All Logs listing provides the ability to view (display) all of the
content of the logs.
Clearing All Log
Entries
ATTENTION! Before clearing information in all of the logs, make sure the
logs are not needed for troubleshooting. Once the logs are cleared, the data
cannot be retrieved.
To clear all logs’ entries, select Monitor and select the Logs tab. Select
the Clear All Logs button, next to the All Logs link. A message
displays stating that the operation has been performed
Obtain Port Diagnostic Information
Fibre Channel port diagnostic information can be obtained by
inspecting port LEDs at the switch front panel or operating
parameters at the SANpilot interface.
Port LEDs
To obtain port operational information, inspect port LEDs at the
switch front panel. Amber and blue/green LEDs adjacent to each
port indicate operational status as described in Table 4-1.