FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

4-10
McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
Figure 4-9 Setting Embedded Port Frame Filtering
Clearing Embedded
Port Frame Log Entries
ATTENTION! Before clearing logs, make sure the logs are not needed for
troubleshooting. Once a log is cleared, the data cannot be retrieved.
To clear the Embedded Frame Log, select Monitor and select the Logs
tab and then select the Clear Log button. A message displays stating
that the operation has been performed successfully.
Viewing All Logs
Select Monitor on the navigation panel. Select the Logs tab; the Logs
tab view displays. Select the All Logs link. The All Logs listing
displays in text format, as shown in Figure 4-10. The log displays in a
separate browser window. Close the browser window to close the
log.