FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

xvi
McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
Laser Compliance
Statement
Laser transceivers for the switch are tested and certified in the United
States to conform to Title 21 of the Code of Federal Regulations (CFR),
Subchapter J, Parts 1040.10 and 1040.11 for Class 1 laser products.
Elsewhere, the transceivers are tested and certified to be compliant
with International Electrotechnical Commission IEC825-1 and
European Norm EN60825-1 and EN60825-2 regulations for Class 1
laser products. Class 1 laser products are not considered hazardous.
The transceivers are designed such that there is never human access
to laser radiation above a Class 1 level during normal operation or
prescribed maintenance conditions.
Federal
Communications
Commission (FCC)
Statement
The switch generates, uses, and can radiate radio frequency energy,
and if not installed and used in accordance with instructions
provided, may cause interference to radio communications. The
product was tested and found to comply with the limits for Class A
computing devices pursuant to Subpart B of Part 15 of the FCC Rules,
which are designed to provide reasonable protection against such
interference in a commercial environment. Operation of the product
in a residential area is likely to cause interference in which case the
user, at his or her own expense, will take whatever measures are
required to correct the interference. Any modifications or changes
made to the product without explicit approval from McDATA, by
means of a written endorsement or through published literature, will
invalidate the service contract and void the warranty agreement with
McDATA.
Chinese National
Standards Mark
The Chinese National Standards (CNS) mark illustrated below
indicates switch compliance with Taiwanese Bureau of Standards,
Metrology, and Inspection (BSMI) regulatory requirements.