FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

Diagnostics

3-67

A zone merge process failed during ISL initialization. The following list

explains the reason:

• Failure reason 09 - Invalid data caused a zone merge failure.

• Failure reason 0A - A Cannot Merge condition caused a zone

merge failure.

Obtain supplementary error code data for the 150 event code. At the

SANpilot Event Log, examine bytes 12 through 15 of event data that

specify the error code. Record the error code and supplementary

error code data.

Perform the data collection procedure and return the diskette to

McDATA for analysis. Contact the next level of support, and report the

150 event code, the associated failure reason, and the associated

error code. Exit MAP.