FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

Diagnostics
3-55
3
Was an event code 011, 021, 051, 052, 061, 062, 063, 070, 071,
072, 140, 142, or 150 observed at the SANpilot Event Log?
YES NO
↓ Go to step 5.
4
Tabl e 3-10 on page 3-55 lists event codes, brief explanations of the
codes, and associated steps that describe fault isolation procedures.
Table 3-10 MAP 600 Event Codes
Event
Code
Explanation Action
011 Login Server database invalid. Go to step 7.
021 Name Server database invalid. Go to step 7.
051 Management Server database invalid. Go to step 8.
052 Management Server internal error. Go to step 8.
061 Fabric Controller database invalid. Go to step 9.
062 Maximum interswitch hop count exceeded. Go to step 10.
063 Remote switch has too many ISLs. Go to step 11.
070 E_Port is segmented. Go to step 12.
071 Switch is isolated. Go to step 12.
072 E_Port connected to unsupported switch. Go to step 20.
140 Congestion detected on an ISL. Go to step 21.
142 Low BB_Credit detected on an ISL. Go to step 22.
150 Zone merge failure. Go to step 23.