FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

3-30
McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
Figure 3-12 HyperTerminal Dialog Box
n. Click No to exit and close the HyperTerminal application.
o. Power off the maintenance terminal.
p. Disconnect the RS-232 null modem cable from the switch and
the maintenance terminal. Replace the protective cap over the
maintenance port.
Did changing the IP address of the switch solve the problem?
NO YES
↓ The switch-to-SANpilot PC connection is restored and
appears operational. Exit MAP.
Failure of the switch Ethernet port is indicated. Replace the switch.
Exit MAP.
MAP 0400: FRU Failure Analysis
This MAP describes fault isolation for the switch and FRUs. Failure
indicators include:
• An event code recorded at the SANpilot Event Log.
• The amber LED on the FRU illuminates.
•A Failed message associated with a FRU at the SANpilot
interface.
1
Was an event code 300, 301, 302, 426, 433, 440, 810, or 811
observed at the SANpilot Event Log?
YES NO
↓ Go to step 3.