FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

3-28
McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
Figure 3-9
COMn Properties Dialog Box
h. Configure the Port Settings parameters as follows:
— Bits per second - 115200.
— Data bits - 8.
— Parity - None.
— Stop bits - 1.
— Flow control - Hardware or None.
When the parameters are set, click OK. The Sphereon 4300 -
HyperTerminal dialog box displays.
i. At the > prompt, type the user-level password (default is
password) and press Enter. The password is case sensitive.
The Sphereon 4300 - HyperTerminal dialog box displays with a
C> prompt at the bottom of the window.
j. At the C> prompt, type ipconfig and press Enter. The
Sphereon 4300 - HyperTerminal dialog box displays with
configuration information listed, including the IP address
(Figure 3-10).