FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

3-24

McDATA Sphereon 4300 Fabric Switch Installation and Service Manual

If this intermittent problem continues, perform the data

collection procedure and return the diskette to McDATA for

analysis. Exit MAP.

A Page cannot be found, Unable to locate the server, HTTP

404 - file not found, or other similar message appears. The message

indicates the PC cannot communicate with the switch because:

• The switch-to-PC Internet (Ethernet) link could not be

established.

• AC power distribution in the switch failed, or AC power was

disconnected.

• The switch CTP card failed.

Continue to the next step.

Ensure the switch reporting the problem is connected to facility AC

power. Inspect the switch for indications of being powered on, such

as:

• At the front bezel, an illuminated PWR LED (green)

or ERR LED (amber).

• Illuminated LEDs adjacent to Fibre Channel ports.

• Audio emanations and airflow from cooling fans.

Does the switch appear powered on?

YES NO

↓ A power distribution problem is indicated. Go to MAP 0100:

Power Distribution Analysis on page 3-18. Exit MAP.

At the front of the switch, inspect the amber ERR LED.

Is the LED illuminated?

NO YES

↓ A FRU failure or link incident is indicated. Go to MAP 0000:

Start MAP on page 3-6. Exit MAP.