FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

3-12
McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
15
Repeat step 11 through step 14 for each remaining Fibre Channel
port for which a problem is suspected (ports 0 through 11).
Is a problem indicated for any of the ports?
NO YES
↓ Go to step 18 to obtain event codes. If no event codes are
found, go to MAP 0500: Port Failure and Link Incident
Analysis on page 3-35. Exit MAP.
16
Inspect the power supply operational state.
a. At the View panel, click the FRU Properties tab. The FRU
Properties page displays (Figure 3-4).
Figure 3-4 View Panel (FRU Properties Tab)
b. Inspect the Status field for the power supply.
Does the Status field display a Failed message for the power supply?
NO YES
↓ A power supply failure is indicated. Go to step 18 to obtain
event codes. If no event codes are found, go to MAP 0100:
Power Distribution Analysis on page 3-18. Exit MAP.