958-000284-007, March 2005)

Workaround

Reseating the optical transceiver corrects the problem.

Possible switch reset after power failure or power off sequence

In extremely rare instances, af ter a power failure or power off sequence, an ed ge switch

or director configuration may be reset to factory default settings. This is evident when

HAFM is unable to communicate with the edge switch or director a fter being powered

on. This c ondition occurs because the IP address assigned to the edge switch or director

has been reset to the factory default value (10.1.1.10).

Workaround

If this c ondition occurs, the configuration of the edge switch or d irector must be restored,

and the IP address must be restored. Also, all licensed features need to be reactivated

by entering the license keys again.

SNMP issues

SNMP traps warmStart and coldStart are not always received across Ethernet

switches.

Workaround

None.