HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Command Line Interface Reference Guide (November 2005)

86 4 - CONFIGURATION-MODE COMMANDS
IMPORTANT: When you define a neighbor, you must specify the HP EFS WAN Accelerator
in-path IP address, not the primary IP address.
Syntax in-path neighbor ip address <addr> [port <port>]
Parameters
Example
minna (config) # in-path neighbor ip-address 10.0.0.4
minna (config) #
in-path neighbor keepalive count
Description Sets the keep-alive messages before terminating connections with the neighbor HP
EFS WAN Accelerator for TCP connection forwarding.
Syntax in-path keepalive count <count>
Parameters
Example
minna (config) # in-path neighbor keepalive count 10
minna (config) #
in-path neighbor keepalive interval
Description Sets the time interval between keep-alive messages with the neighbor HP EFS WAN
Accelerator for connection forwarding.
Syntax in-path keepalive interval <seconds>
Parameters
Example
minna (config) # in-path neighbor keepalive interval 10
minna (config) #
in-path neighbor port
Description Sets the neighbor port for the HP EFS WAN Accelerator in connection forwarding
deployments.
<addr> Specifies the IP address of the in-path HP EFS WAN Accelerator.
port <port> Specifies the port for the in-path HP EFS WAN Accelerator.
<count> Specifies the number of keep-alive messages. The default value is
3.
<seconds> Specifies the number of seconds between keep-alive messages.
The default value is 10.