HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Command Line Interface Reference Guide (November 2005)

74 4 - CONFIGURATION-MODE COMMANDS
Parameters
Example
minna (config) # datastore send addr 10.0.0.03
minna (config) #
datastore sync enable
Description Enables automatic data store synchronization. The data store is replicated from the
master (primary) HP EFS WAN Accelerator to the backup (passive) HP EFS WAN
Accelerator. You must enable failover support to implement data store
synchronization. The no command option disables data store synchronization.
IMPORTANT: If you are setting up automated data store synchronization for the first time, the
HP EFS WAN Accelerator service is halted on the backup HP EFS WAN Accelerator. You must
restart the HP EFS WAN Accelerator service on both.
Syntax datastore sync enable
Parameters None
Example
minna (config) # datastore sync enable
minna (config) #
datastore sync peer-ip
Description Sets the IP address for the peer HP EFS WAN Accelerator for which you want to
replicate data on.
Syntax datastore sync peer-ip <addr>
Parameters
Example
minna (config) # datastore sync peer-ip 10.0.0.3
minna (config) #
datastore sync port
Description Sets the port for the peer HP EFS WAN Accelerator for which you want to replicate
data on.
Syntax datastore sync port <port>
<addr> Specifies the IP address of the remote HP EFS WAN Accelerator.
<addr> Specifies the IP address of the peer HP EFS WAN Accelerator.