HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Command Line Interface Reference Guide (November 2005)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 59
4 - CONFIGURATION-MODE
C
OMMANDS
 “file tcpdump” on page 80
 “file tcpdump delete” on page 80
 “file tcpdump upload” on page 80
 “hardware upgrade model” on page 81
 “hostname” on page 81
 “image boot” on page 81
 “image delete” on page 82
 “image fetch” on page 82
 “image install” on page 82
 “image move” on page 83
 “in-path enable” on page 83
 “in-path interface enable” on page 83
 “in-path interface vlan tag” on page 84
 “in-path kickoff” on page 84
 “in-path neighbor enable” on page 84
 “in-path neighbor ip address” on page 85
 “in-path neighbor keepalive count” on page 86
 “in-path neighbor keepalive interval” on page 86
 “in-path neighbor port” on page 86
 “in-path oop enable” on page 87
 “in-path peering rule” on page 87
 “in-path peering move-rule” on page 88
 “in-path rule auto-discover” on page 89
 “in-path rule deny” on page 90
 “in-path rule discard” on page 91
 “in-path rule fixed-target” on page 91
 “in-path rule move” on page 93
 “in-path rule pass-through” on page 93
 “in-path simplified routing” on page 94
 “interface” on page 94
 “ip default-gateway” on page 95
 “ip domain-list” on page 95
 “ip host” on page 96
 “ip in-path route” on page 96
 “ip in-path-gateway” on page 96
 “ip name-server” on page 97