HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Command Line Interface Reference Guide (November 2005)

52 3 - ENABLE-MODE COMMANDS
Parameters
Example
minna # show stats alarm
Alarm admission_conn: ok
Alarm admission_mem: ok
Alarm bypass: ok
Alarm cpu_util_indiv: ok
Alarm critical_temp: ok
Alarm duplex: ok
Alarm halt_error: ok
Alarm paging: ok
Alarm rcu_error: ok
Alarm service_error: ok
Alarm store_corruption: ok
Alarm sw-version: ok
Alarm warning_temp: ok
show tacacs
Description Displays Terminal Access Controller Access Control System (TACACS+) settings.
Syntax show tacacs
Parameters None
Example
minna # show tacacs
TACACS+ defaults:
key:
timeout: 3
retransmit: 1
No TACACS+ servers configured.
alarm <type> Displays alarm statistics. Specify alarm type or
<carriage return>: <alarm-ID>, admission-conn,
admission_mem, bypass, cpu_util_indiv,
critical_temp, duplex, halt_error, paging,
ruc_error, service_error, store_corruption, sw-
version, warning_temp.
bandwidth all | <port> bi-
directional | lan-to-wan | wan-to-
lan | bi-directional [5min | hour |
day | week | month]
Displays bandwidth statistics.
connections {5min | hour | day |
week | month}
Displays connection statistics.
cpu Displays Central Processing Unit (CPU) statistics.
datastore <carriage return> |
[5min | hour | day | week | month]
Displays data store statistics.
memory Displays memory statistics.
settings bandwidth ports Displays ports being monitored.
throughput [all | <port>] Displays throughput statistics.
traffic {5min | hour | day | week |
month}
Displays traffic statistics for the last hour, day, week,
or month.