HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Command Line Interface Reference Guide (November 2005)

42 3 - ENABLE-MODE COMMANDS
Active: yes
Start date:
End date:
XXX-XXXXXX-XXXX-XXXX-X-XXXX-XXXX-XXXX
Feature: SH10EXCH
Valid: yes
Active: yes
Start date:
End date:
show limit bandwidth
Description Displays current bandwidth threshold settings.
Syntax show limit bandwidth
Parameters None
Example
minna # show limit bandwidth
Max rate: 4000 kb/s
wan0_0 : disabled
primary: disabled
show log
Description Displays system logs.
Syntax show log [continuous | files <log number> | matching]
Parameters
Example
minna # show log
Dec 22 20:00:00 localhost /usr/sbin/crond[784]: (root) CMD (/usr/sbin/
logrotate /etc/logrotate.conf)
Dec 22 20:00:00 localhost cli[555]: [cli.INFO]: user admin: CLI got
signal 2 (SIGINT)
Dec 22 20:02:31 localhost cli[555]: [cli.INFO]: user admin: Executing
command: show ip route
Dec 22 20:02:38 localhost cli[555]: [cli.INFO]: user admin: CLI got
signal 2 (SIGINT)
Dec 22 20:03:16 localhost cli[555]: [cli.INFO]: user admin: CLI got
signal 2 (SIGINT)
Dec 22 20:04:00 localhost cli[555]: [cli.INFO]: user admin: Executing
command: show ip route static
Dec 22 20:05:02 localhost cli[555]: [cli.INFO]: user admin: Executing
command: show licenses
Dec 22 20:05:09 localhost cli[555]: [cli.INFO]: user admin: CLI got
signal 2 (SIGINT)
Dec 22 20:06:44 localhost cli[555]: [cli.INFO]: user admin: Executing
command: show limit bandwidth
Dec 22 20:06:49 localhost cli[555]: [cli.INFO]: user admin: CLI got
continuous Displays the log continuously, similar to the tail -f command.
files <log number> Displays a list of log files or a specific log file.
matching Displays a list of matching log files.