HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Command Line Interface Reference Guide (November 2005)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 37
3 - ENABLE-MODE COMMANDS
Example minna # show info
Status: Healthy
Config: working
Appliance Up Time: 2d 3h 48m 22s
Service Up Time: 21h 35m 42s
Temperature (C): 43
Serial: S1200036332
Model: DL380-5010
Revision: A
Version: rapanui-flamebox
minna #
show in-path
Description Displays current in-path configuration settings.
Syntax show in-path
Parameters None
Example
minna # show in-path
Enabled: yes
Kickoff: yes
L4/PBR/WCCP (on wan0_0): no
Optimizations Enabled On:
inpath0_0
VLAN Tag IDs:
inpath0_0: 0
minna #
show in-path neighbor
Description Displays current connection forwarding settings. For detailed information, see “in-
path neighbor enable” on page 84.
Syntax show in-path neighbor
Parameters None
Example
minna # show in-path neighbor
Connection forwarding Enabled: no
Connection forwarding Port: 7850
Keepalive Count: 3
Keepalive Interval: 10
show in-path peering rules
Description Displays current in-path peering rules for serial cluster deployments.
Syntax show in-path peering rules
Parameters None