HP StorageWorks HSG80 ACS Solution Software V8.8 for Linux X86 Installation and Configuration Guide (AA-RV1LA-TE, March 2005)

FC Configuration Procedures
139HSG80 ACS Solution Software V8.8 for Linux X86 Installation and Configuration Guide
Configuring Storage Containers
For a technology refresher on this subject, refer to "Choosing a Container Type",
page 71.
In choosing a container, you choose between independent disks (JBODs) or one of
several storageset types, as shown in Figure 38. The independent disks and the
selected storageset may also be partitioned.
The following configurations are detailed in the following sections:
■ "Configuring a Stripeset", page 140
■ "Configuring a Mirrorset", page 140
■ "Configuring a RAIDset", page 141
■ "Configuring a Striped Mirrorset", page 142
■ "Configuring a Single-Disk Unit (JBOD)", page 143
■ "Configuring a Partition", page 143
Figure 38: Storage container types
Partition
Striped mirrorset
(R0+1)
Stripeset
(R0)
RAIDset
(R3/5)
Mirrorset
(R1)
Single
devices
(JBOD)
Storagesets
Containers