HP StorageWorks HSG80 ACS Solution Software V8.8 for Linux X86 Installation and Configuration Guide (AA-RV1LA-TE, March 2005)

Installing and Configuring HSG Agent
115HSG80 ACS Solution Software V8.8 for Linux X86 Installation and Configuration Guide
Configuring the Agent
SWadmin (config.sh) is a menu-based administration tool that is usually
used to modify your Agent configuration after installation. It provides more
options than
install.sh, so it is recommended for advanced users or users
with unique configuration needs. It can also be used for first-time
configuration. See “Configuring the Agent with RAID Array V8.8-1
Configuration Maneuver” instructions on running Config.sh.
Configuring the Agent with RAID Array V8.8-1 Configuration Menu
To view the RAID Array V8.8-1 Configuration Menu, run the Config.sh script
from the
$basedir/steam/bin directory (usually /usr/local/steam/bin).
1. Enter the following command:
# cd /usr/local/steam/bin
2. Enter the following command:
#./config.sh
The Configuration Menu shown in Figure 34 opens.
Figure 34: SWadmin tool for configuring LUNs and SWCC Agent