HP StorageWorks HSG80 ACS Solution Software V8.8 for OpenVMS Installation and Configuration Guide (AA-RV1PA-TE, March 2005)

Preparing the Host System
96 HSG80 ACS Solution Software V8.8 for OpenVMS Installation and Configuration Guide
The lock is maintained in the failover information (fi) section of each controller's
NV. When the state of the lock is changed on one controller, the other controller is
updated as well. The existing CLI command to ADD CONN is not affected by the
state of the lock.
Viewing Host Connection Table Lock State
The state of the lock can be displayed using:
CLI> SHOW <THIS | OTHER>
The following string is displayed just before the port topology information:
Host Connection Table is <LOCKED | NOT locked >