HP StorageWorks HSG80 ACS Solution Software V8.8 for OpenVMS Installation and Configuration Guide (AA-RV1PA-TE, March 2005)

Installing and Configuring the HSG Agent
124 HSG80 ACS Solution Software V8.8 for OpenVMS Installation and Configuration Guide
Caution: Do not uninstall the Agent if you want to preserve configuration
information. If you only want to install an upgrade, stop the Agent, and then
install the new version. Older versions will be automatically removed before
the update, but all configuration information will be preserved.
The following is the detailed procedure for fully removing agent software:
1. Enter the following at the command prompt:
$ @sys$manager:swcc_config
The Configuration menu appears.
2. To disable the Agent, select option 3.
3. To remove the Agent, select option 4.
4. Select option Y. The host tells you that the Agent has been stopped and
SWCC is being disabled. You are then asked if you want to continue.
5. Select option Y.
Note: This option stops all instances of the Agent on all cluster nodes and deletes all
Agent files, except the .PCSI file used to install the Agent.