HP StorageWorks HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for IBM AIX Release Notes (AA-RV1JA-TE, March 2005)

Hardware and Software Support
32 HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for IBM
AIX Release Notes
When using IBM AIX V4.3.3:
bos.sysmgt.trace (Version 4.3.3.50 or later)
When using IBM AIX V5.1:
bos.sysmgt.trace (Version 5.1.0.10 or later)
When using IBM AIX V5.2:
bos.sysmgt.trace (Version 5.2.0.12 or later)
Note: Any version prior to this will cause IBM AIX to freeze when a trace is attempted.
The ability to run a trace can be verified by entering the command:
# lslpp –l bos.sysmgt.trace
This file is required to use the runtrace tool provided in the
PC1000.driver.obj driver package. It calls the trace tool for AIX, and
without the
bos.sysmgt.trace file set of the recommended level, the host
machine will freeze.
StorageWorks Command Console (SWCC)
SWCC V2.5 is included in this release. V2.5 is used to identify the SWCC suite of
components.
SWCC provides a graphical user interface that can be used to configure and
monitor your storage system. Use of SWCC is highly recommended, but not
required. The SWCC Agent is installed as part of the Solution Software Kit.
For more information on SWCC installation, refer to the HSG80 ACS Solution
Software V8.8 Installation and Configuration Guide. For more information on
SWCC Client operation, refer to the Command Console V2.5 User Guide and the
Command Console V2.5 Release Notes.