HP StorageWorks HSG80 ACS Solution Software V8.8 for OpenVMS Installation and Configuration Guide (AA-RV1PA-TE, March 2005)

Planning a Subsystem

45HSG80 ACS Solution Software V8.8 for OpenVMS Installation and Configuration Guide

■ Controller A, port 1—worldwide name + 3, for example

5000-1FE1-FF0C-EE03

■ Controller A, port 2—worldwide name + 4, for example

5000-1FE1-FF0C-EE04

Use the CLI command,

SHOW THIS_CONTROLLER/OTHER_CONTROLLER to display the

subsystem’s worldwide name.

Restoring Worldwide Names (Node IDs)

If a situation occurs that requires you to restore the worldwide name, you can

restore it using the worldwide name and checksum printed on the sticker on the

frame into which the controller is inserted.

Figure 12 shows the placement of the worldwide name label for the Model 2200

enclosure, and Figure 13 for the BA370 enclosure.

Figure 12: Placement of the worldwide name label on the Model 2200 enclosure

1 Node ID

(Worldwide name)

2 Checksum

CXO7228A

WWN INFORMATION

P/N:

WWN:

Checksum:

NNNN – NNNN – NNNN – NNNN

S/N: