HP StorageWorks HSG80 ACS Solution Software V8.8 for Linux X86 Installation and Configuration Guide (AA-RV1LA-TE, March 2005)

Using CLI for Configuration
156 HSG80 ACS Solution Software V8.8 for Linux X86 Installation and Configuration Guide
RENAME !NEWCON00 PURPLE1A1
SET PURPLE1A1 OPERATING_SYSTEM=SUN
SHOW CONNECTIONS
Note: Connection table sorts alphabetically.
Mark or tag both ends of Fibre Channel cables.
Plug in the Fibre Channel cable from the second adapter in host “WHITE.”
SHOW CONNECTIONS
Note: The offset for !NEWCONO1 is automatically set to 100 because it is plugged
into host port 2.
Connection
Name
Operating
System
Controller Port Address Status
Unit
Offset
!NEWCON00 WINNT THIS 1 XXXX
XX
OL this 0
HOST_ID=XXXX-XXXX-XXXX-XX
XX
ADAPTER_ID=XXXX-XXXX-XXX
X-XXXX
Connection
Name
Operating
System
Controller Port Address Status
Unit
Offset
RED1A1 OTHER 1 XXXX
XX
OL
other
0
HOST_ID=XXXX-XXXX-XXXX-XXXX ADAPTER_ID=XXXX-XXXX-XXX
X-XXXX