HP StorageWorks HSG80 ACS Solution Software V8.8 for Linux X86 Installation and Configuration Guide (AA-RV1LA-TE, March 2005)

FC Configuration Procedures
134 HSG80 ACS Solution Software V8.8 for Linux X86 Installation and Configuration Guide
10. Set up any additional optional controller settings, such as changing the CLI
prompt. See the
SET THIS CONTROLLER/OTHER CONTROLLER command in the HP
StorageWorks HSG60 and HSG80 Array Controller and Array Controller
Software Command Line Interface Reference Guide for the format of optional
settings. Perform this step on both controllers.
11. Verify that all commands have taken effect by entering the following
command:
SHOW THIS