HP StorageWorks HSG80 ACS Solution Software V8.8 for Linux X86 Installation and Configuration Guide (AA-RV1LA-TE, March 2005)

Installing and Configuring HSG Agent
114 HSG80 ACS Solution Software V8.8 for Linux X86 Installation and Configuration Guide
Your Command Console LUN for this controller has a SCSI ID of “0,0,0”. After
performing a
/dev/MAKEDEV sgk command, you receive the following output
from the command
scsi_info /dev/sgk:
SCSI_ID=”0,0,0”
MODEL=”DEC HSGCCL”
FW_REV=”V86”
Note: At this point the sd device sdk maps to the sg device sgl.