HP StorageWorks Fabric OS 5.x MIB Reference Guide (AA-RVHXB-TE, September 2005)

Fabric OS 5.x MIB reference guide 239
connUnitLinkEntry
OID 1.3.6.1.3.94.1.12.1
Description An entry describing a particular link to another.
Index connUnitLinkUnitId
connUnitLinkIndex
connUnitLinkUnitId
OID 1.3.6.1.3.94.1.12.1.1
Description The connUnitId of the connectivity unit that contains this link table.
Note Set to WWN of the local switch.
connUnitLinkIndex
OID 1.3.6.1.3.94.1.12.1.2
Description This value is used to create a unique value for each entry in the link table with the same
connUnitLinkUnitId. The value can be reused only if it is not currently in use and the value
is the next candidate to be used. This value is allowed to wrap at the highest value
represented by the number of bits. This value is reset to 0 when the system is reset and the
first value to be used is 1.
Note Indexes 1 through maximum number of ports is reserved for ISL.
Indexes maximum number of ports + 1 and above are reserved for end devices and are
calculated based on portID of the end devices.
connUnitLinkNodeIdX
OID 1.3.6.1.3.94.1.12.1.3
Description The node WWN of the unit at one end of the link. If the node WWN is unknown and the
node is a connUnit in the responding agent, then the value of this object must be equal to
its connUnitID.
Note WWN of the local switch.
connUnitLinkPortNumberX
OID 1.3.6.1.3.94.1.12.1.4
Description The port number on the unit specified by connUnitLinkNodeIdX, if known; otherwise, –1.
If the value is nonnegative, then it is equal to connUnitPortPhysicalNumber.
Note ISL: Physical port number of the E_Port.
Device: Physical port # to which the device is connected.
connUnitLinkPortWwnX
OID 1.3.6.1.3.94.1.12.1.5
Description The port WWN of the unit specified by connUnitLinkNodeIdX, if known; otherwise, 16
octets of binary 0.
Note The WWN of the port to which the device is connected.