HP StorageWorks Fabric OS 5.x MIB Reference Guide (AA-RVHXB-TE, September 2005)

156 SW MIB objects
swNbBaudRate
OID 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.5
Description The baud rate of the ISL. Possible values are:
• other (1): None of the following
• oneEighth (2):155 Mbaud
• quarter (4): 266 Mbaud
• half (8): 532 Mbaud
• full (16): 1 Gbaud
• double (32): 2 Gbaud
• quadruple (64): 4 Gbaud
Note The valid values for the Core Switch 2/64, SAN Director 2/128, and 4/256 SAN
Director switch are 16 (full) and 32 (double).
The valid value for the SAN Switch 4/32 is 64 (quadruple).
swNbIslState
OID 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.6
Description The current state of the ISL.
swNbIslCost
OID 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.7
Description The current link cost of the ISL. In other words, the cost of a link to control the routing
algorithm.
swNbRemPortName
OID 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.8
Description The WWN of the remote port.
swFabricMemTable
Supported in Fabric OS 2.6.1 and not 3.2.0.
OID 1.3.6.1.4.1.1588.2.1.1.1.2.10
Description This table contains information on the member switches of a fabric. This might not be
available on all versions of Fabric OS.
swFabricMemEntry
OID 1.3.6.1.4.1.1588.2.1.1.1.2.10.1
Description An entry containing each switch in the fabric.
Index swFabricMemWwn
swFabricMemWwn
OID 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.1
Description This object identifies the WWN of the member switch.