HP StorageWorks Fabric OS 5.x MIB Reference Guide (AA-RVHXB-TE, September 2005)

Fabric OS 5.x MIB reference guide 153

swSensorStatus

OID 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3

Description The current status of the sensor. Valid values for swSensorStatus:

• unknown (1): The status of the sensor is unknown.

• faulty (2): The status of the sensor is faulty.

• below-min (3): The sensor value is below the minimal threshold.

• nominal (4): The status of the sensor is nominal.

• above-max (5): The sensor value is above the maximum threshold.

• absent (6): The sensor is missing.

Note See the following list for valid values:

• For Temperature, valid values include 3 (below-min), 4 (above-max), and 4 (nominal).

• For Fans, valid values include 3 (below-min), 4 (nominal), and 6 (absent).

• For Power Supplies valid values include 2 (faulty), 4 (nominal), and 6 (absent).

swSensorValue

OID 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4

Description The current value (reading) of the sensor.

The value -2147483648 represents the maximum value of integer value; it also means

that the sensor does not have the capability to measure the actual value. In 2.0, the

temperature sensor value is in Celsius, the fan value is in RPM (revolutions per minute),

and the power supply sensor reading is unknown.

Note The unknown value -2147483648 indicates the maximum value of integer value.

swSensorInfo

OID 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5

Description Additional information on the sensor. It contains the sensor type and number in textual

format; for example, Temp 3 or Fan 6.

Note Return values for the Core Switch 2/64, SAN Director 2/128, and 4/256 SAN Director

depend upon the configuration of your system.

swTrackChangesInfo

OID 1.3.6.1.4.1.1588.2.1.1.1.1.23

Description Track changes string; for trap only.

Note If there are no events to track, the default return value is No event so far.