HP StorageWorks Fabric OS 5.X Procedures User Guide (AA-RVHWB-TE, September 2005)

Fabric OS 5.x administrator guide 107
The Fabric OS CLI supports only a subset of the HP management features for FICON fabrics. The full set of
FICON CUP administrative procedures is available using the HP Fabric Manager and Advanced Web
Tools software features. You can also use an SNMP agent and the FICON
MIB. For information on these
tools, see:
• Advanced Web Tools: HP StorageWorks Fabric OS 5.x Advanced Web Tools administrator guide
• Fabric Manager: HP StorageWorks Fabric Manager 5.x administrator guide
• SNMP Agent and FICON MIB: HP StorageWorks Fabric OS 5.x MIB administrator guide
Table 18 Fabric OS commands related to FICON and FICON CUP
Command Description
Standard Fabric OS commands:
configure Sets the domain ID and the IDID mode.
portSwap Swaps ports.
portSwapDisable Disables the portSwap command.
portSwapEnable Enables the portSwap command.
portSwapShow Displays information about swapped ports.
Commands specific to FICON:
ficonclear rlir Removes all registered link incident records (RLIRs) from the local RLIR
database.
ficonclear rnid Removes all outdated RNID records from the local RNID database.
ficonshow ilir
[fabric]
Displays FRU failure information on the local switch or on the fabric.
ficonshow lirr
[fabric]
Displays registered listeners for link incidents for the local switch or for
the fabric.
ficonshow rlir
[fabric]
Displays link incidents for the local switch or for the fabric.
ficonshow rnid
[fabric]
Displays node identification data for all devices registered with the local
switch or all devices registered with all switches defined in the fabric.
ficonshow switchrnid
[fabric]
Displays node identification data for the local switch or for the fabric.
Commands specific to FICON CUP:
ficoncupset fmsmode Sets FICON Management Server mode on or off for the switch.
ficoncupset modereg Sets the mode register bits for the switch.
ficoncupshow fmsmode Displays the FICON Management Server mode setting for the switch.
ficoncupshow modereg Displays the mode register bit settings for the switch.