HP StorageWorks Fabric OS 5.x MIB Reference Guide (AA-RVHXB-TE, September 2005)

Fabric OS 5.x MIB reference guide 97
fc FE module table
This table contains information about the fc Fe modules, one entry for each module.
fcFeModuleTable
OID 1.3.6.1.3.42.2.1.1.4
Description A table that contains information about the modules, one entry for each module.
fcFeModuleEntry
OID 1.3.6.1.3.42.2.1.1.4.1
Status Mandatory
Description An entry containing the configuration parameters of a module.
Index fcFeModuleIndex
fcFeModuleIndex
OID 1.3.6.1.3.42.2.1.1.4.1.1
Description Identifies the module within the FE for which this entry contains information. This value is
never greater than fcFeModuleCapacity.
fcFeModuleDescr
OID 1.3.6.1.3.42.2.1.1.4.1.2
Description A textual description of the module. This value should include the full name and version
identification of the module. It should contain printable ASCII characters.
Note See ”sysDescr” on page 41.
fcFeModuleObjectID
OID 1.3.6.1.3.42.2.1.1.4.1.3
Description The vendor’s authoritative identification of the module. This value might be allocated
within the SMI enterprises subtree (1.3.6.1.4.1). It provides a straight-forward and
unambiguous means for determining what kind of module is being managed.
For example, this object could take the value 1.3.6.1.4.1.99649.3.9 if vendor Neufe Inc.
was assigned the subtree 1.3.6.1.4.1.99649, and had assigned the identifier
1.3.6.1.4.1.99649.3.9 to its FeFiFo-16 PlugInCard.
Note See ”sysObjectID” on page 41.
fcFeModuleOperStatus
OID 1.3.6.1.3.42.2.1.1.4.1.4
Description Indicates the operational status of the module:
• online (1): The module is functioning properly.
• offline (2): The module is not available.
• testing (3): The module is under testing.
• faulty (4): The module is defective in some way.