HP StorageWorks Fabric OS 5.x MIB Reference Guide (AA-RVHXB-TE, September 2005)

Fabric OS 5.x MIB reference guide 33
MIB loading order
Many MIBs use definitions that are defined in other MIBs. These definitions are listed in the IMPORTS
section near the top of the MIB. When loading the HP MIBs, see Figure 5 to ensure any MIB dependencies
are loading in the correct order.
Figure 5 HP SNMP MIB dependencies and advised installation order
NOTE: FA_v3_0.mib obsoletes the use of the connUnitPortStatFabricTable used in the FA_v2_2.mib.
FA_v3_0.mib now uses the connUnitPortStatTable for port statistics. The FA_v3_0.mib and the
FA_v2_2.mib cannot be loaded concurrently on the same SNMP management system.
The FE_RFC2837.mib and the FE_EXP.mib can be loaded concurrently on the same SNMP management
system. The FE_EXP.mib was listed in the experimental OID section. The FE_RFC2837.mib has subsequently
been ratified by the standards organizations.
All versions of Fabric OS support SNMPv1. Fabric 2.6.x and 3.2.x partially support SNMPv2. Fabric OS
4.4.0 and 5.x support SNMPv3-USM (snmpUsmMIB) MIB.
HP MIB files
The following HP MIBs can be found in a mibs subdirectory after uncompressing the 5.x firmware file.
• BRCD_v5_0.mib
• SW_v5_2.mib
RFC1213-MIB
MIB-II
RFC1155-SMI
SNMPv2-SMI
SMNPv2-TC
RFC2571
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
FA_v2_2.mib
FCMGMT-MIB
Fabric OS 2.6.x
FA_v3_0.mib
FCMGMT-MIB
Fabric OS 3.x, 4.x, 5.x
BRCD_v5_0.mib
HP-REG-MIB, HP-TC
Fabric OS 2.6.x, 3.x, 4.x, 5.x
FE_EXP.mib
FCFABRIC-ELEMENT-MIB
Fabric OS 2.6.x, 3.0.x
FE_RFC2837.mib
FIBRE-CHANNEL-FE-MIB
Fabric OS 3.1.x, 4.x, 5.x
FICON.mib
FICON-MIB
Fabric OS 4.x, 5.x
SW_v5_2.mib
SW-MIB
Fabric OS 2.6.x, 3.x, 4.x, 5.x
ENTITY_RFC2737.mib
ENTITY-MIB
Fabric OS 4.x, 5.x
HA_v5_1.mib
HA-MIB
Fabric OS 4.x, 5.x
Select one or both
Select one
Dependency
Standard MIB File
Module name
HP MIB
Module name
Fabric OS supported
Legend
snmpUsmMIB
User-based Security Model
Fabric OS 4.4 and 5.x