Manualshelf

HP StorageWorks Fabric OS 5.x MIB Reference Guide (AA-RVHXB-TE, September 2005)

ManualsBrandsHP ManualsStorageHP StorageWorks Core Switch 2/64 power pack
241242243244245246247248249250
Fabric OS 5.x MIB reference guide 243
connUnitPortStatCountRxElements
OID 1.3.6.1.3.94.4.5.1.7
Description The number of octets or bytes that have been received by this port. There is a one-second
periodic polling of the port. This value is saved and compared with the next polled value
to compute net throughput.
Note For Fibre Channel, ordered sets are not included in the count.
connUnitPortStatCountBBCreditZero
OID 1.3.6.1.3.94.4.5.1.8
Description The number of transitions in/out of BB credit zero state. The other side is not providing
any credit.
Note This is a Fibre Channel statistic only.
connUnitPortStatCountInputBuffersFull
Not supported.
OID 1.3.6.1.3.94.4.5.1.9
Description The number of occurrences when all input buffers of a port were full and outbound
buffer-to-buffer credit transitioned to 0. There is no credit to provide to other side.
Return Value: 80 0 0 0 0 0 0 0 (Not Supported)
Note This is a Fibre Channel statistic only.
connUnitPortStatCountFBSYFrames
OID 1.3.6.1.3.94.4.5.1.10
Description The number of times that FBSY was returned to this port as a result of a frame that could
not be delivered to the other end of the link. This occurs if either the Fabric or the
destination port is temporarily busy. Port can occur only on SOFc1 frames (the frames that
establish a connection).
Note This is a Fibre Channel only statistic; the sum of all classes. If you cannot keep the by-class
counters, then keep the sum counters.
connUnitPortStatCountPBSYFrames
Not supported.
OID 1.3.6.1.3.94.4.5.1.11
Description The number of times that PBSY was returned to this port as a result of a frame that could
not be delivered to the other end of the link. This occurs if the destination port is
temporarily busy. PBSY can occur only on SOFc1 frames (the frames that establish a
connection).
Return Value: 80 0 0 0 0 0 0 0 (not supported)
Note This is a Fibre Channel only statistic; the sum of all classes. If you cannot keep the by class
counters, then keep the sum counters.