HP StorageWorks Fabric OS 5.x MIB Reference Guide (AA-RVHXB-TE, September 2005)

240 FibreAlliance MIB objects
connUnitLinkNodeIdY
OID 1.3.6.1.3.94.1.12.1.6
Description The node WWN of the unit at the other end of the link. If the node WWN is unknown
and the node is a connUnit in the responding SNMP agency, then the value of this object
must be equal to its connUnitID.
Note ISL: WWN of the remote switch.
Device: Node name of the device.
connUnitLinkPortNumberY
OID 1.3.6.1.3.94.1.12.1.7
Description The port number on the unit specified by connUnitLinkNodeIdY, if known; otherwise, –1. If
the value is nonnegative then it is equal to connUnitPortPhysicalNumber.
Note ISL: Physical port number of the remote port.
Device: –1.
connUnitLinkPortWwnY
OID 1.3.6.1.3.94.1.12.1.8
Description The port WWN on the unit specified by connUnitLinkNodeIdY, if known; otherwise, 16
octets of binary 0.
Note ISL: WWN of the remote port.
Device: Port name.
connUnitLinkAgentAddressY
OID 1.3.6.1.3.94.1.12.1.9
Description The address of an FCMGMT MIB agent for the node identified by connUnitLinkNodeIdY,
if known; otherwise, 16 octets of binary 0.
Note ISL: IP address (IPv4).
Device: 0 (Null).
connUnitLinkAgentAddressTypeY
OID 1.3.6.1.3.94.1.12.1.10
Description If connUnitLinkAgentAddressY is nonzero, it is a protocol address.
ConnUnitLinkAgentAddressTypeY is the address family number assigned by IANA to
identify the address format (for example, 1 is Ipv4, 2 is Ipv6).
Note ISL: Type 2.
Device: 0 (Null).
connUnitLinkAgentPortY
OID 1.3.6.1.3.94.1.12.1.11
Description The IP port number for the agent. This is provided in case the agent is at a non-standard
SNMP port.
Note ISL: IP port.
Device: 0 (Null).