HP StorageWorks Fabric OS 5.x MIB Reference Guide (AA-RVHXB-TE, September 2005)

234 FibreAlliance MIB objects
connUnitPortStatObject
OID 1.3.6.1.3.94.1.10.1.19
Description This contains the OID of the first object of the table that contains the statistics for this
particular port. If this has a value of 0, then there are no statistics available for this port.
The port type information helps identify the statistics objects found in the table. From this
point, use the getnext command to get the next statistics object. When the first part of
the OID changes, the end of table has been reached.
Note Mapped to connUnitPortStatFabricUnitId.
connUnitPortProtocolCap
Not supported in Fabric OS 2.6.1.
OID 1.3.6.1.3.94.1.10.1.20
Description The bit mask that specifies the driver-level protocol capability of this port.
If this is not applicable, return all bits set to 0.
Return value = 07F
Note The bits have the following definitions:
• 0 = unknown
• 1 = Loop
• 2 = Fabric
• 4 = SCSI
• 8 = TCP/IP
• 16 = VI
• 32 = FICON
connUnitPortProtocolOp
Not supported in Fabric OS 2.6.1.
OID 1.3.6.1.3.94.1.10.1.21
Description The bit mask that specifies the driver level protocols that are currently operational.
Return value = 07F
Note If this is not applicable, return all bits set to zero. The bits have the following definitions:
• 0 = unknown
• 1 = Loop
• 2 = Fabric
• 4 = SCSI
• 8 = TCP/IP
• 16 = VI
• 32 = FICON